bosch dishwasher manual 800 series

Smart Home Integration

The Bosch 800 Series offers seamless smart home integration through the Home Connect app․ Remotely monitor cycles, receive notifications, and control settings for enhanced convenience․ Voice control compatibility with Amazon Alexa and Google Assistant allows hands-free operation, ensuring a modern and connected kitchen experience․ This feature-rich integration simplifies dishwashing management, providing flexibility and efficiency for today’s smart home enthusiasts․

Installation Guidelines

Ensure proper installation by following pre-installation requirements and step-by-step instructions․ Verify electrical and plumbing connections meet specifications․ Only qualified professionals should perform the installation for safety and optimal functionality․

Pre-Installation Requirements

Before installing the Bosch 800 Series dishwasher, ensure the installation site meets specific criteria․ The area must be level, well-ventilated, and have access to electrical and water connections․ Verify that the electrical supply matches the dishwasher’s requirements, typically 120V, 60Hz, and a dedicated 15-20 amp circuit․ Check water supply lines for proper sizing and ensure the drain hose is compatible․ Measure the space to confirm the dishwasher fits, and ensure proximity to a grounded electrical outlet․ Only qualified professionals should perform the installation to guarantee safety and compliance with Bosch guidelines․

Step-by-Step Installation Process

Begin by preparing the installation site, ensuring it is level and clear of debris․ Connect the electrical supply to the dedicated 120V circuit and attach the water inlet hose to the dishwasher․ Secure the drain hose to the waste water pipe and ensure all connections are tight․ Level the dishwasher and fasten it to adjacent cabinets for stability․ Finally, test all connections and run a diagnostic cycle to confirm proper operation․

• Ensure the site is level and prepared․
• Connect electrical and water supply lines․
• Secure the drain hose properly․
• Level and fasten the dishwasher․
• Test connections and run a diagnostic cycle․

Follow these steps carefully to complete the installation successfully․

Electrical and Plumbing Requirements

Your Bosch 800 Series dishwasher requires a dedicated 120V, 60Hz electrical circuit and proper grounding․ The water supply line must be 3/8″ in diameter, with a minimum pressure of 10 psi and a maximum of 120 psi․ The drain hose should be 1″ in diameter and securely connected to a waste water pipe․ Ensure all connections comply with local plumbing and electrical codes․ Consult a professional if unsure to guarantee safe and efficient installation․

• Dedicated 120V, 60Hz electrical circuit required․
• Water supply line: 3/8″ diameter, 10-120 psi pressure․
• Drain hose: 1″ diameter, secure connection to waste pipe․
• Comply with local electrical and plumbing codes․

Proper connections ensure safe and efficient operation․

Operating the Dishwasher

Operating your Bosch 800 Series dishwasher is straightforward with its intuitive control panel and advanced features․ Simply load dishes, select the desired cycle, and let the dishwasher handle the rest․ Ensure dishes are properly arranged for optimal cleaning, and refer to the manual for cycle recommendations․ Start the dishwasher with a gentle touch and enjoy quiet, efficient operation․

• Use the control panel to select cycles and options․
• Load dishes according to guidelines for best results․
• Start the dishwasher with a simple touch․

Effortless operation ensures sparkling clean dishes every time․

Understanding the Control Panel

The Bosch 800 Series dishwasher features an intuitive control panel designed for easy operation․ The panel includes a LED display and sensor-activated buttons that guide you through cycle selection, options, and status updates․ It provides real-time feedback on cycle progress, temperature settings, and error codes․ The interface is user-friendly, allowing you to navigate seamlessly through various functions․ Familiarize yourself with the control panel to maximize efficiency and customize your dishwashing experience․ Refer to the manual for detailed explanations of each button and display indicator․

• LED display shows cycle status and settings․
• Sensor-activated buttons for easy navigation․
• Real-time feedback on operation and errors․

Mastering the control panel ensures optimal use of your dishwasher’s advanced features․

Wash Cycles and Options

The Bosch 800 Series dishwasher offers a variety of wash cycles and options to cater to different cleaning needs․ Choose from cycles like Heavy Duty, Normal, Delicate, and Quick Wash for tailored cleaning․ Additional options include sanitize, extra dry, and delayed start․ These features allow you to customize each load for optimal results․ Refer to the manual for detailed descriptions of each cycle and option to ensure you select the best setting for your dishes․

• Multiple cycles for specific cleaning needs․
• Customizable options for enhanced performance․
• Sanitize and dry settings for hygienic results․

Selecting the right cycle and options ensures your dishes receive the care they need․

Loading Dishes Effectively

Properly loading your Bosch 800 Series dishwasher ensures optimal cleaning and prevents damage․ Arrange dishes facing the center, with utensils in designated holders․ Avoid overcrowding racks, as this can block water jets․ Large or bulky items should be placed at the bottom to maintain water flow․ Use the adjustable racks and tines to accommodate various dish sizes, ensuring even spacing for thorough cleaning․

• Face dishes toward the center for better water flow․
• Use utensil holders to prevent damage and tangling․
• Don’t overcrowd racks to ensure proper cleaning․
• Adjust racks to fit large or irregularly shaped items․

Efficient loading maximizes cleaning performance and protects your dishes․

Starting and Stopping the Dishwasher

To start the Bosch 800 Series dishwasher, ensure the door is closed securely and select your desired cycle using the control panel․ Press the Start button to begin the cycle․ The dishwasher will automatically lock the door during operation․ To stop the dishwasher, press and hold the Start button until the cycle pauses․ Always ensure the door is fully closed before starting to maintain proper operation and safety․

• Close the door securely before starting the cycle․
• Select the desired cycle using the control panel․
• Press the Start button to initiate the wash cycle․
• Press and hold Start to pause or stop the dishwasher․

Follow these steps to operate your dishwasher safely and efficiently․

Maintenance and Care

Regular maintenance ensures optimal performance․ Clean the filter monthly, inspect parts for wear, and run diagnostics․ This ensures efficiency and longevity․ Refer to specific sections for detailed guidance․

Cleaning the Dishwasher Filter

Cleaning the dishwasher filter is essential for maintaining performance․ Locate the filter at the bottom, remove it, and rinse under warm water․ Use mild detergent to scrub away debris․ Regular cleaning prevents clogs and odor buildup․ Replace the filter securely after cleaning․ Avoid harsh chemicals to maintain filter integrity․ This simple maintenance step ensures efficient washing and drying results․ Refer to your Bosch 800 Series manual for detailed instructions and recommendations․

Checking and Replacing Parts

Regularly inspect dishwasher parts like seals, spray arms, and filters for wear or damage․ Replace worn-out seals to prevent leaks and ensure proper door alignment․ Clean or replace clogged spray arms to maintain water flow efficiency․ Check the detergent dispenser for blockages and rinse aids for proper function․ Refer to the Bosch 800 Series manual for specific replacement instructions and compatible part numbers․ Always use genuine Bosch parts for optimal performance and reliability․

Running Diagnostic Tests

To run diagnostic tests on your Bosch 800 Series dishwasher, press and hold the “Start” button for 5 seconds until the display shows “d_DIAG․” This mode identifies issues like faulty sensors or malfunctioning components․ Error codes will appear, which you can reference in the manual for solutions․ If unresolved, contact Bosch customer support for assistance․ Regular diagnostics help maintain performance and address potential issues before they escalate․

Regular Cleaning Tips

Regular cleaning is essential for maintaining your Bosch 800 Series dishwasher’s performance․ Clean the filter monthly to remove food particles and debris․ Run a cleaning cycle using Bosch’s recommended cleaning agent to eliminate grease and odors․ Wipe down the door seals and exterior regularly to prevent mold and mildew․ Additionally, check for blockages in the spray arms and detergent dispenser․ These simple steps ensure optimal cleaning results and extend the lifespan of your dishwasher․

• Clean the filter monthly for optimal water flow․
• Run a cleaning cycle to remove grease and odors․
• Wipe door seals and exterior to prevent mold․

Troubleshooting Common Issues

Identify and resolve common issues like error codes, poor cleaning results, or unusual noises․ Resetting the dishwasher or checking the filter often solves problems․ Consult the manual for specific solutions․

Common Error Codes and Solutions

The Bosch 800 Series dishwasher may display error codes like E01, E02, or E15, indicating issues such as water supply problems or sensor malfunctions․ Refer to the manual for specific solutions․ For example, E01 often relates to a blocked filter, while E15 may indicate a water supply issue․ Cleaning the filter or checking water inlet hoses can resolve these errors․ Regular maintenance, like cleaning filters and checking for blockages, helps prevent common issues and ensures optimal performance․

• E01: Clean the filter or check for blockages․
• E02: Ensure the detergent dispenser is closed properly․
• E03: Verify proper water supply and inlet hose connections․
• E15: Check for kinks or blockages in water supply lines․

Restarting the dishwasher after addressing the issue often resolves the error․ Consult the manual for detailed troubleshooting steps and solutions to maintain your appliance’s efficiency․

Resetting the Dishwasher

To reset your Bosch 800 Series dishwasher, press and hold the “Start” button for 3-5 seconds until the display resets․ Alternatively, unplug the dishwasher for 30 seconds to perform a hard reset․ After resetting, ensure all error codes are cleared and the dishwasher operates normally․ This process can resolve minor glitches or errors without requiring advanced troubleshooting․ Always refer to the manual for specific reset procedures tailored to your model․

• Press and hold the “Start” button for 3-5 seconds․
• Unplug the dishwasher for 30 seconds for a hard reset․
• Check for cleared error codes after resetting․

Resetting helps resolve minor issues and restores default settings for optimal performance․

Energy Efficiency and Eco-Friendly Features

Bosch 800 Series dishwasher features Energy Star certification, advanced water-saving technology, and eco-friendly cycles to minimize energy and water consumption, promoting sustainability․

• Energy Star certified․
• Water-saving technology․
• Eco-friendly cycles․

Energy-Saving Modes and Settings

The Bosch 800 Series dishwasher offers multiple energy-saving modes and settings designed to reduce water and energy consumption․ The Eco Mode ensures low water usage while maintaining cleaning performance․ Additionally, the Energy Saver option optimizes drying cycles to minimize energy use․ These features work seamlessly with the dishwasher’s advanced sensors, which detect soil levels and adjust water temperature and cycle duration accordingly․ By utilizing these settings, users can significantly lower their energy bills while maintaining eco-friendly operation․ These modes are easily accessible through the control panel for convenient customization․

• Eco Mode for reduced water usage․
• Energy Saver option for optimized drying․
• Advanced sensors for efficient operation․